|
Applicable fibers
|
Single / SMF (G.652/657), MMF (G.651), DSF (G.653), NZDSF (G.655)
|
|
Cladding dia. / Sheath dia.
|
80-150μm / 100-3000μm
|
|
Cleave length
|
5mm to 16mm with sheath clamp
|
|
Splice mode / heating mode
|
Total 100 splice modes / 30 heating modes
|
|
Splice loss
|
0.02dB (SM), 0.01dB (MM), 0.04dB (DSF) and 0.04dB (NZDS)
Measured by cut-back method relevant to ITU-T and IEC standards.
|
|
Attenuation splice function
|
Intentional high splice loss of 0.1dB to 15dB（0.1dB step） can be made for an in-line fixed attenuator.
|
|
Splice time / tube heating time
|
Typical 7sec with SM / Typical 14sec with FP-03 (60mm) sleeve
|
|
Splice result storage
|
Last 2000 splices
|
|
Viewing methods / magnification
|
2 axis CMOS camera with 4.73” color LCD.
X / Y (320X magnification), or both X and Y simultaneously (200X magnification)
|
|
Tension test
|
1.96 to 2.25N
|
|
Applicable protection sleeve
|
60mm, 40mm and Fujikura micro sleeves
|
|
No. of splice / heating per battery full charge*1
|
Typical 200 cycles with BTR-09
|
|
Electrode life
|
3000 splices
|
|
Size / weight
|
146W x 159D x 150H (mm) / 2.7kg (including battery)
|
|
Operating condition
|
Altitude : 0 to 5,000m above sea level, Wind : 15m/sec
Temperature : -10 to 50deg C, Humidity : 0 to 95%RH, non-dew
|
|
Resistance features*2
|
Shock : 76cm (30inch) all surface drop
Dust : Exposure to dust (0.1 to 500μm dia Alumina Silicate), IP5X
Rain : H=10mm/hr for 10min, IPX2
|
|
Other features
|
PC software upgrade / data management
|
|
Terminals
|
USB 2.0 (Mini-B type) connector for PC communication.
6-pin Mini-DIN connector for HJS-02 or HJS-03 power supply
|